Upgrading The Firmware For The Spa400 - Linksys SPA9000 Administration Manual

Administering the SPA400 and Voice Mail Service

Upgrading the Firmware for the SPA400

As needed, you can download new firmware from Linksys.com and then install the firmware on
the SPA400.
1. Connect to the SPA400 administration web server. (See
Administration Web Server, " on page
2. Click Administration tab > Firmware Upgrade.
3. Click Browse.
4. Find the binary (.bin file) that you extracted to your Desktop, and click Open. The selected
file appears in the File Path field on the Firmware Upgrade page.
5. Click Upgrade.
6. When the confirmation message appears, click OK.
7. When the Setup page reappears, verify that the Firmware Version number matches the
firmware version that you installed. You have successfully upgraded the firmware.
NOTE: You may need to refresh your browser to display the updated banner reflecting the
new version number.
Linksys Voice System Administration Guide
Upgrading the Firmware for the SPA400
80.)
SPA400 Administration > Firmware Upgrade
SPA400 Main Page: Firmware Version
"Connecting to the SPA400
84