Recording An Auto Attendant Prompt - Linksys SPA9000 Administration Manual

Recording an Auto Attendant Prompt

Follow this procedure to overwrite an existing recording or to add a new recording.
Customized prompts are erased when a factory reset is performed on
Note
the SPA9000.
1. Connect an analog phone to the Phone 1 or Phone 2 port of the SPA9000.
2. Press the star key (*) four times:
The IVR plays the following prompt: Linksys configuration menu. Please enter the option
followed by the # (pound) key or hang up to exit.
3. Press 72255# to access the Auto Attendant message settings.
The IVR plays the following prompt: Please enter the message number followed by the #
(pound) key.
4. Enter the number of the message (1 through 10) that you wish to record, review, or delete.
The IVR plays the following prompt: Enter 1 to record. Enter 2 to review. Enter 3 to delete. Enter
* to exit.
5. Press 1 to record a new message.
NOTE: The IVR checks the available buffer size. If there is no more buffer capability, IVR plays
the Option Failed message and returns to the previous menu.
If the buffer space is sufficient, the IVR plays the following prompt: You may record your
message after the tone. When finished, press #.
6. After the tone, record the new message and then press #.
The IVR plays the following prompt: To save, enter 1. To review, enter 2. To re-record, enter 3. To
exit, enter *.
7. Press 1 to save the new recorded message.
The IVR plays the following prompt: One moment, please.
8. Wait for several seconds while the save is completed.
Linksys Voice System Administration Guide
Configuring the LVS Auto-Attendant
Working with the Auto Attendant Greetings
****
105