Linksys SPA9000 Administration Manual page 184

Call Back Deact Code
Call Back Busy Act Code
Cfwd All Act Code
Cfwd All Deact Code
Cfwd Busy Act Code
Cfwd Busy Deact Code
Cfwd No Ans Act Code
Cfwd No Ans Deact Code
Cfwd Last Act Code
Cfwd Last Deact Code
Block Last Act Code
Block Last Deact Code
Accept Last Act Code
Accept Last Deact Code
CW Act Code
CW Deact Code
CW Per Call Act Code
CW Per Call Deact Code
Block CID Act Code
Block CID Deact Code
Linksys Voice System Administration Guide
Cancels a callback.
Default: *86
Starts a callback when the last outbound call is busy.
Default: *05
Forwards all calls to the extension specified after the activation code.
Default: *72
Cancels call forwarding of all calls.
Default: *73
Forwards busy calls to the extension specified after the activation code.
Default: *90
Cancels call forwarding of busy calls.
Default: *91
Forwards no-answer calls to the extension specified after the activation
code.
Default: *92
Cancels call forwarding of no-answer calls.
Default: *93
Forwards the last inbound or outbound calls to the extension specified
after the activation code.
Default: *63
Cancels call forwarding of the last inbound or outbound calls.
Default: *83
Blocks the last inbound call.
Default: *60
Cancels blocking of the last inbound call.
Default: *80
Accepts the last outbound call. It lets the call ring through when do not
disturb or call forwarding of all calls are enabled.
Default: *64
Cancels the code to accept the last outbound call.
Default: *84
Enables call waiting on all calls.
Default: *56
Disables call waiting on all calls.
Default: *57
Enables call waiting for the next call.
Default: *71
Disables call waiting for the next call.
Default: *70
Blocks caller ID on all outbound calls.
Default: *67
Removes caller ID blocking on all outbound calls.
Default: *68
Voice tab
182