Configuring The Streaming Audio Server - Linksys SPA9000 Administration Manual

On SPA1:
SAS Enable[1] = no
MOH Server [1] = 1002
SAS Enable[2] = yes
On SPA2:
SAS Enable[1] = no
MOH Server [1] = 1002
SAS Enable[2] = no
MOH Server [2] = 1002

Configuring the Streaming Audio Server

The following provides step-by-step procedures for implementing a SAS with an external music
source.
1. Connect an RJ-11 adapter between the music source (a CD player or iPod, for example) and
an FXS port on the SPA9000 (Phone 1 or Phone 2).
2. Connect to the SPA9000 administration web server, and choose Admin access with
Advanced settings. (See
page 24).
3. Configure the FXS port:
a. Click Voice tab > FXS N, where N represents the SPA9000 phone port number where
you connected the RJ-11 adapter.
b. Enter the following settings:
– Display Name: Enter an extension number of name for the FXS 1 port, such as
Receptionist Area Fax Machine.
– User ID: Enter a three- to four-digit extension number that is not is use by other
extension.
c. Scroll down to the Streaming Audio Server (SAS) section.
d. From the SAS Enable drop-down list, choose yes.
4. Click Submit All Changes.
Linksys Voice System Administration Guide
"Connecting to the SPA9000 Administration Web Server, " on
Voice > FXS N > Streaming Audio Server
Configuring Music on Hold
Configuring a Streaming Audio Server
101