Event Logs; Set Log Level; Tone - Linksys SPA9000 Administration Manual

FXO Line status
Hook Status
Line status (1-4)
Battery Level
Line (1-4)

Event Logs

This section describes the fields on the SetLog Level page.
Event Logs tab

Set Log Level

SPA400 logs significant events onto its internal buffer. For each log type, you can choose to
include Fatal Errors, Errors, Events, or All Information. Another option is OFF, meaning that no
information is collected for the selected log type.
Event Log Level
Telephony
SIP
DSP
Dial plan
Voice mail
Others

Tone

Call process tone configuration
Tone on fraction
High cutoff frequency
Low cutoff frequency
Linksys Voice System Administration Guide
The status of each line port:
• On-Hook indicates that the FXO port is not in use.
• Off-Hook indicates that a call is in progress.
The currently voltage on the line port, if the port is connected to a
PSTN line; for example, a connected line could show -51 V
Log level for telephony events
Log level for SIP events
Log level for DSP events
Log level for dial plan events
Log level for voice mail events
Log level for all other events
The duty cycle of the CP tone to be detected
The highest frequency of a valid CP tone
The lowest frequency of a valid CP tone
Event Logs
212