Linksys SPA9000 Administration Manual page 156

• "VLAN Settings section, " on page 155
Router tab > Wan Setup page >
Internet Connection Settings section
Connection Type
Router tab > Wan Setup page >
Static IP Settings section
Static IP
NetMask
Gateway
Router tab > Wan Setup page >
PPPoE Settings section
PPPoE Login Name
PPPoE Login Password
PPPoE Service Name
Router tab > Wan Setup page >
Optional Settings section
HostName
Domain
Primary DNS
Secondary DNS
DNS Server Order
Linksys Voice System Administration Guide
IP address assignment scheme, static or DHCP.
Static IP address of SPA9000, which takes effect if DHCP is disabled.
Default: 0.0.0.0
The NetMask used by SPA9000 when DHCP is disabled.
Default: 255.255.255.0
The default gateway used by SPA9000 when DHCP is disabled.
Default: 0.0.0.0
The account name assigned by the ISP for connecting on a Point-to-
Point Protocol over Ethernet (PPPoE) link.
The password assigned by the ISP for connecting on a Point-to-Point
Protocol over Ethernet (PPPoE) link.
The service name assigned by the ISP for connecting on a Point-to-Point
Protocol over Ethernet (PPPoE) link.
The host name of the SPA9000
The network domain of the SPA9000.
The DNS server that is used by the SPA9000
NOTE: When DHCP is enabled, you can enter the IP address of a DNS
server in addition to DHCP-supplied DNS servers. When DHCP is
disabled, enter the primary DNS server. Default: 0.0.0.0
The DNS server that is used by the SPA9000
NOTE: When DHCP is enabled, you can enter the IP address of a DNS
server in addition to DHCP-supplied DNS servers. When DHCP is
disabled, enter the primary DNS server. Default: 0.0.0.0
The method for selecting the DNS server: Manual, Manual/DHCP, and
DHCP/Manual
Router Tab
154