Linksys SPA9000 Administration Manual page 174

AA script 1/2/3
Daytime AA
Day Time
DayTime AA Script
DayTime Answer Delay
Nighttime AA
NightTime AA Script
NightTime Answer Delay
Weekend/Holiday AA
Weekend/Holiday AA Script
Linksys Voice System Administration Guide
AA script. See Chapter 4, Configuring the LVS Auto-Attendant, for the
complete syntax.
Default:
<aa><form id="dir" type="menu"> <audio src="prompt1" bargein=
"T"/> <noinput timeout="10" repeat="T"/> <nomatch repeat="F">
<audio src="prompt3" bargein="T"/> </nomatch> <dialplan src=
"dp1"/> <match> <default> <audio src="prompt2"/> <xfer name=
"ext" target="$input"/> </default></match> </form></aa>
To enable the daytime Auto-Attendant, select yes. Otherwise, select no.
Default: yes
Daytime hours for the daytime Auto-Attendant in 24-hour format. Enter
the start and end times in this format:
start=hh:mm:ss;end=hh:mm:ss (hh for hours, mm for minutes, and ss for
seconds).
For example, start=9:0:0;end=17:0:0 means that the start time is 9 AM
and the end time is 5 PM. The other hours (5 PM to 9 AM) are considered
nighttime hours.
If you do not enter start and end times, the whole day (24 hours) is
considered as daytime, so the nighttime Auto-Attendant is not used,
even if it is enabled.
Specifies which AA script (1, 2, or 3) is used for the AA treatment when
operating in daytime mode.
Default: 1
Number of seconds before the AA answers when operating in the
daytime mode.
Default: 12
To enable the nighttime Auto-Attendant, select yes. Otherwise, select
no.
Default: no
Specifies which AA script (1, 2, or 3) is used for the AA treatment when
operating in daytime mode.
Default: 1
Number of seconds before the AA answers when operating in the
nighttime mode.
Default: 0
To enable this Auto-Attendant, select yes. Otherwise, select no.
Default: no
Specifies which AA script (1, 2, or 3) is used for the AA treatment when
operating in daytime mode.
Default: 1
Voice tab
172