Voice tab >
FXS 1/2 page
You can use the FXS 1 page and the FXS 2 page to configure the settings for the FXS devices that
are connected to the Phone 1 and Phone 2 ports of the SPA9000.
•
"Line Enable section, " on page 189
•
"Network Settings section, " on page 189
•
"SIP Settings section, " on page 190
•
"Subscriber Information section, " on page 191
•
"Dial Plan section, " on page 191
•
"Mailbox Status section, " on page 191
•
"Streaming Audio Server (SAS) section, " on page 192
•
"Call Feature Settings section, " on page 192
•
"Audio Configuration section, " on page 193
•
"FXS Port Polarity Configuration section, " on page 196
Voice tab > FXS 1/2 page
Line Enable section
Line Enable
Voice tab > FXS 1/2 page
Network Settings section
SIP ToS/DiffServ Value
SIP CoS Value [0-7]
RTP ToS/DiffServ Value
RTP CoS Value [0-7]
Linksys Voice System Administration Guide
Enables this line for service (yes) or removes this line from service (no)
Default: yes
TOS/DiffServ field value in UDP IP packets carrying a SIP message.
Default: 0x68
CoS value for SIP messages.
Default: 3
ToS/DiffServ field value in UDP IP packets carrying RTP data.
Default: 0xb8
CoS value for RTP data.
Default: 6
Voice tab
189