Wan Setup Page - Linksys SPA9000 Administration Manual

Licenses
Router tab > Status page >
System Status section
Current Time
Elapsed Time
Wan Connection Type
Current IP
Host Name
Domain
Current Netmask
Current Gateway
Primary DNS
Secondary DNS
LAN IP Address
Broadcast Pkts Sent
Broadcast Bytes Sent
Broadcast Pkts Recv
Broadcast Bytes Recv
Broadcast Pkts Dropped
Broadcast Bytes Dropped
Router tab >

Wan Setup page

You can use the Wan Setup page to enter the WAN connection settings. This page includes the
following sections:
• "Internet Connection Settings section, " on page 154
• "Static IP Settings section, " on page 154
• "PPPoE Settings section, " on page 154
• "Optional Settings section, " on page 154
• "MAC Clone Settings section, " on page 155
• "Remote Management section, " on page 155
• "QOS Settings section, " on page 155
Linksys Voice System Administration Guide
When populated with the value K0, indicates that the SPA9000 is
licensed for up to 16 users; if this field is blank, install firmware version
5.2.5 or higher.
Current date and time of the system; for example, 10/3/2003 16:43:00
Total time elapsed since the last reboot of the system; for example, 25
days and 18:12:36
The connection type: DHCP or Static IP
The current IP address assigned to the SPA9000
The current host name assigned to the SPA9000
The network domain name of the SPA9000
The network mask assigned to the SPA9000
The default router assigned to the SPA9000
The primary DNS server assigned to the SPA9000
The secondary DNS server assigned to the SPA9000
The LAN IP address of the SPA9000. SPA9000
NOTE: Do not deploy the SPA9000 as a router.
Total number of broadcast packets sent
Total number of broadcast bytes sent
Total number of broadcast bytes received
Total number of broadcast bytes received and processed
Total number of broadcast packets received but not processed
Total number of broadcast bytes received but not processed
Router Tab
153