G726r16 Codec Name
G726r24 Codec Name
G726r32 Codec Name
G726r40 Codec Name
G729a Codec Name
G729b Codec Name
G723 Codec Name
EncapRTP Codec Name
Voice tab > SIP page
NAT Support Parameters section
Handle VIA received
Handle VIA rport
Insert VIA received
Insert VIA rport
Substitute VIA Addr
Send Resp To Src Port
Linksys Voice System Administration Guide
G.726-16 codec name used in SDP.
Default: G.726-16
G.726-24 codec name used in SDP.
Default: G.726-24
G.726-32 codec name used in SDP.
Default: G.726-32
G.726-40 codec name used in SDP.
Default: G.726-40
G.729a codec name used in SDP.
Default: G.729a
G.729b codec name used in SDP.
Default: G.729ab
G.723 codec name used in SDP.
Default: G.723
EncapRTP codec name used in SDP.
Default: encaprtp
If you select yes, the SPA9000 processes the received parameter in the
VIA header (this value is inserted by the server in a response to any one
of its requests). If you select no, the parameter is ignored. Select yes or
no from the drop-down menu.
Default: no
If you select yes, the SPA9000 processes the rport parameter in the VIA
header (this value is inserted by the server in a response to any one of its
requests). If you select no, the parameter is ignored. Select yes or no
from the drop-down menu.
Default: no
Inserts the received parameter into the VIA header of SIP responses if
the received-from IP and VIA sent-by IP values differ. Select yes or no
from the drop-down menu.
Default: no
Inserts the rport parameter into the VIA header of SIP responses if the
received-from IP and VIA sent-by IP values differ. Select yes or no from
the drop-down menu.
Default: no
Lets you use NAT-mapped IP-address port values in the VIA header.
Select yes or no from the drop-down menu.
Default: no
Sends responses to the request source port instead of the VIA sent-by
port. Select yes or no from the drop-down menu.
Default: no
Voice tab
166