Factory Default; Usb Setting; Firmware Upgrade; Reboot - Linksys SPA9000 Administration Manual

Administration tab

Factory Default

Restore Factory
Defaults
Administration tab

USB Setting

USB Device
USB status
I want to reset USB (check
box)
Reset (button)
Administration tab

Firmware Upgrade

Firmware Upgrade
File Path
Browse
Upgrade
Administration tab

Reboot

Restart System
Linksys Voice System Administration Guide
Erases the current settings and resets the SPA400 to the original factory
default settings
The status of the USB storage device: mount (file system mounted and
available) or unmount
Erases the voice mail messages that are stored on the USB
The file path to the firmware file that you want to install, as selected by
using the Browse button
Allows you to select a firmware file on your PC, and populates the File
Path field
Starts the Firmware upgrade, using the file that is specified in the File
Path field
Restarts the SPA400
NOTE: All SPA400 connections will be broken.
Administration
210