Linksys Tribox SPA400 Integration Manual
Trixbox integration guide
Hide thumbs
Also See for Tribox SPA400:
- Administration and configuration manual (14 pages) ,
- Product data (4 pages) ,
- Administration manual (246 pages)
Related Manuals for Linksys Tribox SPA400
Summary of Contents for Linksys Tribox SPA400
- Page 1 Linksys SPA400 Trixbox Integration Guide Access Point – Connecting You & Your Customers. Contact : support@voipshop.com.au...
- Page 2 Overview: The Linksys SPA400 is a 4 Line FXO gateway capable of connecting 4 PSTN lines to your asterisk system to make and receive calls. This guide is a step by step on how to configure Trixbox to utilize the features of the SPA400.
- Page 3 Step 3 – Set the SPA400 to a Fixed IP address Asterisk needs to access your SPA400, so it needs to be set to a fixed ip address. To do this: - Under Setup -> Basic Setup • Select Fixed IP address and enter a valid fixed IP address for your network.
- Page 4 Step 4 – Setup the SPA400 Voice Configuration. Open the SPA400 in your web browser using the new IP address. Select Setup->SPA9000 Interface. • Enter SPA400 in the User ID: • Leave SPA9000 on discover automatically • No other changes should need to be made •...
- Page 5 For Australia you need to change:- • Impedance : 220 Ohms + (820 Ohms || 120nF) • On-Hook speed : 26ms...
- Page 6 Step 5 – Configure Trixbox Trunk. Open your FreePBX interface: Select Trunks -> Add SIP trunk Complete the form with the details below: ---------------------------------------------------------------------- Outbound Caller ID: Blank Never Override CallerID : Unticked Maximum Channels: (the number of pstn lines plugged into the Dial Rules: Leave Empty Outbound Dial Prefix: Empty Trunk Name: SPA400 (Can be anything you wish)
- Page 7 Step 6 – Configure Outbound Route. You can now treat the SPA400 like any other trunk. To add an outbound router (eg, dial 9 to dial out the SPA400) Outbound Routes -> Add Route Route Name: SPA400PSTN (this can be anything) Route Password: Blank Emergency Dialing: Unticked Intra Company Route: Unticked...
- Page 8 Complete: You should now be able to make and receive calls via your SPA400. Email support@voipshop.com.au Notes: SPA400 IP Address: _____________________________ SPA400 Username: ______________________________ SPA400 Password: ______________________________ Number of Lines: _____ Installed By: _______________________________ Date: ______________________________ for further support if required. Congratulations...