Call Forwarding Support On Spa9000 - Linksys SPA9000 Administration Manual

Configuring Phone Lines and Calling Routing Behavior
5. If you included a call forward rule, modify the Cfwd No Ans Delay parameter to specify the
number of seconds that elapse before a call is considered to be unanswered.
6. Click Submit All Changes. The SPA9000 reboots.
7. To verify your progress, make an inbound call and verify that the call is handled as you intended.

Call Forwarding Support on SPA9000

SPA9000 supports the call forward scenarios listed in the following table.
Called Caller
Party
Client Client
station station
Client Client
station station
Client External
station
Client External
station
External Client
station
SPA9000 supports call forward by client station:
• unconditionally
• when busy
• on no answer
When an incoming call from the ITSP is forked to multiple client stations,
Note
the SPA9000 does not honor the 3xx response returned by any of the
client stations. If you wish the call to be forwarded to voicemail or
another client station when it is not picked up, you can specify the
optional "cfwd=target" syntax in the Contact List.
Linksys Voice System Administration Guide
Call Forwarding Support on SPA9000
Forward Target Remarks
Client station Proxy only; no direct involvement
External Very similar to calling external number
Client station ACKs the 302 from called party. Then
INVITEs the target. NOTE: If the original
INVITE is forked to more than one client
station, call forward is not performed.
External ACKs the 302 from called party. Sends
200 to caller, then blind REFERs caller to
target. NOTE: If the original INVITE is
forked to more than one client station,
call forward is not performed
External ACKs the 302 from called party, then
INVITEs the target
71