NTP
NTP Server 1
Time Zone
Syslog Server
Setup tab
SPA9000 Interface
SPA9000 User ID
User ID
SPA 9000 Address
Discover Automatically
Static Address
IP Address
Port
Port ID
Port ID 1
Port ID 2
Port ID 3
Port ID 4
Linksys Voice System Administration Guide
IP address or FQDN of a NTP server
Select the time zone
The IP address of the syslog server to which the SPA9000 sends syslog
messages. Leave blank if you do not want to receive syslog messages.
The User ID of the SPA9000
This value must be identical to the User ID that is entered on the
SPA9000 line interface page for this SPA400 device.
Select this radio button if you want the SPA400 to learn the SPA9000 IP
address and port number from the SIP registration packet.
(Recommended)
Select this radio button to enter the IP address of SPA9000. Specify the
IP Address and Port in the provided fields.
IP address of the SPA9000
UDP port number that the SPA9000 uses to register to the SPA400
Default: 5060
A unique ID for the Line 1 port, too allow the SPA9000 to identify
incoming calls from the PSTN
Default: FXO_Port_ID_1
A unique ID for the Line 2 port, too allow the SPA9000 to identify
incoming calls from the PSTN
Default: FXO_Port_ID_2
A unique ID for the Line 3 port, too allow the SPA9000 to identify
incoming calls from the PSTN
Default: FXO_Port_ID_3
A unique ID for the Line 4 port, too allow the SPA9000 to identify
incoming calls from the PSTN
Default: FXO_Port_ID_4
Setup
204