Linksys SPA9000 Administration Manual page 170

Multicast Address
Group Page Address
Max Expires
Force Media Proxy
Proxy Debug Option
Linksys Voice System Administration Guide
IP address (and port number) where the SPA9000 sends control
messages to all the client stations at once. This must be a multicast
address and must contain a port number.
Default: 224.168.168.168:6061.
IP address (and port number) where the SPA9000 tells the client stations
to send and receive group page RTP packets. This must be a multicast
address and must contain a port number.
Default: 224.168.168.168:34567.
Sets the maximum allowed Registration expires value in seconds for
client stations. Linksys recommends using a relatively small value, such
as 60 or 120.
Default: 60
Forces external client stations to use the SPA9000 Media Proxy when
exchanging RTP traffic with external peers. Linksys recommends using a
relatively small value, such as 60 or 120.
Default: no
Controls what SIP messages to log that are received at or sent from the
Proxy listen port. Choices are as follows: {
none—No logging.
1-line—Logs the start-line only for all messages,
1-line excl. OPT—Same as 1-line but excludes OPTIONS request/
response.
1-line excl. NTFY—Same as 1-line but excludes NOTIFY request/
response.
1-line excl. REG—Same as 1-line but excludes REGISTER request/
response.
1-line excl. OPT|NTFY|REG—Same as 1-line but excludes OPTIONS,
NOTIFY, and REGISTER request/response.
full—Logs all SIP messages in verbose mode.
full excl. OPT—Same as full but excludes OPTIONS request/response.
full excl. NTFY—Same as full but excludes NOTIFY request/response.
full excl. REG—Same as full but excludes REGISTER request/response.
full excl. OPT|NTFY|REG—Same as full but excludes OPTIONS, NOTIFY,
and REGISTER request/response.
Default: None
Voice tab
168