Linksys SPA9000 Administration Manual page 203

Proxy Fallback Intvl
Proxy Redundancy Method
Mailbox Status
Mailbox Subscribe URL
Mailbox Deposit URL
Mailbox Subscribe Expires
Mailbox Manage URL
Linksys Voice System Administration Guide
This parameter sets the delay (sec) after which the SPA9000 will retry
from the highest priority proxy (or outbound proxy) servers after it has
failed over to a lower priority server. This parameter is useful only if the
primary and backup proxy server list is provided to the SPA9000 via DNS
SRV record lookup on the server name. (Using multiple DNS A record per
server name does not allow the notion of priority and so all hosts are
considered at the same priority and the SPA9000 will not attempt to fall
back after a fail over).
Default: 3600
SPA9000 will make an internal list of proxies returned in DNS SRV
records. In normal mode, this list will contain proxies ranked by weight
and priority.
If based on SRV, the port is configured, the SPA9000 does normal first
and also inspects the port number based on 1
Default: Normal
The status of the connection to the voice mail server
Mailbox status for all the mailboxes associated with this line interface.
The status is automatically updated when the SPA9000 receives
voicemail status notification from the ITSP.
Format: [mbs[,mbs[,mbs[,...]]]] where:
mbs = mbid:new/old
mbid = mailbox ID, such as 12345
new = number of new messages in mailbox: 0,1,2,...
old = number of old messages in mailbox: 0, 1, 2, ...
Note: This parameter allows $USER and $PROXY macros, such as
$USER@$PROXY
This parameter allows $USER, $PROXY, and $MBID macros, such as
$USER@$PROXY, or $MBID@$PROXY.
Default: blank
Identifies when the mailbox subscription expires.
Recommended: 30
This parameter allows $USER, $PROXY, and $MBID macros, such as
$USER@$PROXY, or $MBID@$PROXY.
Default: blank
Line 1/2/3/4 page
st proxy's port in the list.
201