Managing Access To The Spa400 Web-Based Configuration Utility - Linksys SPA9000 Administration Manual

Administering the SPA400 and Voice Mail Service
Managing Access to the SPA400 Web-Based Configuration
Utility
One log on can be established for access to the SPA400 web-based configuration utility. The
default username of Admin can be changed, and a password can be entered.
1. Connect to the SPA400 administration web server. (See
Administration Web Server, " on page
2. Click Administration tab > Management.
3. Proceed as needed:
• Gateway Username: Type the desired username in this field, up to 32 characters.
• Gateway Password: Type the password.
• Retype to Confirm: Type the password again. Both entries must match exactly.
4. Click Save Settings.
5. To restart the SPA400, complete the following steps:
a. Click Administration tab > Reboot.
b. Click the Restart System button.
c. When the confirmation message appears, click OK. The SPA400 reboots.
d. When the Reboot OK. Go to Setup page? message appears, click OK and wait for 60
seconds (the time required for the SPA9000 to re-register with SPA400).
Linksys Voice System Administration Guide

Managing Access to the SPA400 Web-Based Configuration Utility

80.)
SPA400 Administration > Management
"Connecting to the SPA400
83