Linksys SPA9000 Administration Manual page 64

Voice system ip telephony system pstn voip gateway with integrated voice mail server ip phones
Hide thumbs Also See for SPA9000:
Table of Contents

Advertisement

Configuring Phone Lines and Calling Routing Behavior
Syntax for the Interdigit Short Timer
SYNTAX 1:
:s,
S
( dial plan )
Use this syntax to apply the new setting to the entire dial plan within the parentheses.
SYNTAX 2: sequence
Use this syntax to apply the new setting to a particular dialing sequence.
– s: The number of seconds; if no number is entered after
seconds applies.
Examples for the Interdigit Short Timer
Set the timer for the entire dial plan.
EXAMPLE:
S:6,
(9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx)
While entering a number with the phone off hook, a user can pause for up to 15
S:6,
seconds between digits before the Interdigit Short Timer expires. This setting is
especially helpful to users such as sales people, who are reading the numbers from
business cards and other printed materials while dialing.
Set an instant timer for a particular sequence within the dial plan.
EXAMPLE:
(9,8<:1408>[2-9]xxxxxx |
9,8,1[2-9]xxxxxxxxxS0
the user dials the final digit in the sequence.
Setting the Interdigit Long Timer for the System Dial Plan
Follow the procedure
"Editing the System Dial Plan, " on page
Setting the Interdigit Long Timer for the Phone Dial Plan
Follow the procedure
"Entering a Phone Dial Plan, " on page
Editing the Control Timers for the Default Interdigit Values
Use the following procedure to edit the default timer settings for all
Note
calls. If you need to edit a timer setting only for a particular digit
sequence or type of call, you can edit the dial plan. See
Sequences and Functions, " on page
1. Connect to the SPA9000 administration web server, and choose Admin access with
Advanced settings. (See
page
24.)
2. Click Voice tab > Regional.
3. Scroll down to the Control Timer Values section.
Linksys Voice System Administration Guide
Ss
9,8,1[2-9]xxxxxxxxxS0
With the timer set to 0, the call is transmitted automatically when
"Connecting to the SPA9000 Administration Web Server, " on
Configuring Dial Plans
, the default timer of 5
S
| 9,8,011xx. | 9,8,xx.|[1-8]xx)
57.
58.
Table 4-2, 'Digit
53.
62

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa400Spa9x2

Table of Contents