Provisioning Page; Regional Page - Linksys SPA9000 Administration Manual

Voice tab>

Provisioning page

This page is available for service provider use only. Information is available in the Linksys
Provisioning Guide, which is available only to service providers who are registered with Linksys.
Voice tab >

Regional page

You can use the Regional page to customize the tones and ring patterns, vertical service
activation codes (star codes) and announcement codes, codec selection codes, and other
regional settings such as time zone. This page includes the following sections:
• "Call Progress Tones section, " on page 176
• "Distinctive Ring Patterns section, " on page 178
• "Distinctive Call Waiting Tone Patterns section, " on page 178
• "Distinctive Ring/CWT Pattern Names section, " on page 179
• "Ring and Call Waiting Tone Spec section, " on page 180
• "Control Timer Values (sec) section, " on page 180
• "Vertical Service Activation Codes section, " on page 181
• "Vertical Service Announcement Codes section, " on page 185
• "Outbound Call Codec Selection Codes section, " on page 186
• "Miscellaneous section, " on page 187
Voice tab > Regional page
Call Progress Tones section
Field
Dial Tone
Second Dial Tone
Outside Dial Tone
Linksys Voice System Administration Guide
Description
Prompts the user to enter a phone number. Reorder Tone is played
automatically when <Dial Tone> or any of its alternatives times out.
Default: 350@-19,440@-19;10(*/0/1+2)
Alternative to the Dial Tone when the user dials a three-way call.
Default: 420@-19,520@-19;10(*/0/1+2)
Alternative to the Dial Tone. It prompts the user to enter an external
phone number, as opposed to an internal extension. It is triggered by a,
(comma) character encountered in the dial plan.
Default: 420@-16;10(*/0/1)
Voice tab
176