Linksys SPA9000 Administration Manual page 142

Call Routing Group Line Preference
After you create a group, you must enter a list of lines, in the preferred order. When a group
member places a call, the SPA9000 chooses the first line in the list. If it is unavailable, the
SPA9000 chooses the next line, and so on, until an available line is found. To enter the lines, type
the line numbers in the desired order, separated by commas.
The field cannot be left blank.
Note
USE CASE EXAMPLE: The administrator enters the line preferences for each group in
the following fields:
– Group 1 Line:
Outbound calls from Group 1 (New York) go out through Line 2 (SPA400 connected
to PSTN lines). If that line interface is not available, calls can go out through Line 1
(general use ITSP account).
– Group 2 Line:
Outbound calls from Group 2 (Los Angeles) go out through Line 3 (ITSP account with
a Los Angles DID number). If that line interface is not available, calls can go out
through Line 1 (general use ITSP account).
– Group 3 Line:
Outbound calls from Group 3 (London) go out through Line 4 (ITSP account with a
London DID number). If that line interface is not available, calls can go out through
Line 1 (general use ITSP account).
Creating or Modifying an Outbound Call Routing Group
1. Connect to the SPA9000 administration web server, and choose Admin access with
Advanced settings. (See
page 24).
2. Click Voice tab > SIP.
3. Scroll down to the PBX Parameters section.
4. In the Group 1 User ID field, or other desired Group User ID field, enter the user IDs for the
stations that you want to include. For more information, see
Membership, " on page
5. In the Group 1 Line field, or other desired Group Line field, enter the line interfaces in the
order of preference. For more information, see
page 140.
NOTE: As you make your entries, read the field labels to distinguish between the fields for
Group 1 User ID ... Group 4 User ID and Group 1 Line ... Group 4 Line.
6. Click Submit All Changes.
7. To verify your progress, place a call to a phone that has caller ID, and confirm that the
expected number appears.
Linksys Voice System Administration Guide
2,1
3,1
4,1
"Connecting to the SPA9000 Administration Web Server, " on
139.
"Call Routing Group Line Preference, " on
Advanced Call Control and Routing
"Call Routing Group
140