Linksys SPA9000 Administration Manual page 179

Prompt Tone
Busy Tone
Reorder Tone
Off Hook Warning Tone
Ring Back Tone
Confirm Tone
SIT1 Tone
SIT2 Tone
SIT3 Tone
SIT4 Tone
MWI Dial Tone
Cfwd Dial Tone
Holding Tone
Conference Tone
Linksys Voice System Administration Guide
Prompts the user to enter a call forwarding phone number.
Default: 520@-19,620@-19;10(*/0/1+2)
Played when a 486 RSC is received for an outbound call.
Default: 480@-19,620@-19;10(.5/.5/1+2)
Played when an outbound call has failed or after the far end hangs up
during an established call. Reorder Tone is played automatically when
<Dial Tone> or any of its alternatives times out.
Default: 480@-19,620@-19;10(.25/.25/1+2)
Played when the caller has not properly placed the handset on the
cradle. Off Hook Warning Tone is played when Reorder Tone times out.
Default: 480@10,620@0;10(.125/.125/1+2)
Played during an outbound call when the far end is ringing.
Default: 440@-19,480@-19;*(2/4/1+2)
Brief tone to notify the user that the last input value has been accepted.
Default: 600@-16; 1(.25/.25/1)
Alternative to the Reorder Tone played when an error occurs as a caller
makes an outbound call. The RSC to trigger this tone is configurable on
the SIP screen.
Default: 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/
3,0/4/0)
Alternative to the Reorder Tone played when an error occurs as a caller
makes an outbound call. The response status code (RSC) to trigger this
tone is configurable on the SIP screen.
Default: 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/
3,0/4/0)
Alternative to the Reorder Tone played when an error occurs as a caller
makes an outbound call. The RSC to trigger this tone is configurable on
the SIP screen.
Default: 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/
3,0/4/0)
This an alternative to the Reorder Tone played when an error occurs as a
caller makes an outbound call. The RSC to trigger this tone is
configurable on the SIP screen.
Default: 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/
3,0/4/0)
Played instead of the Dial Tone when there are unheard messages in the
caller's mailbox.
Default: 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Played when all calls are forwarded.
Default: 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
Informs the local caller that the far end has placed the call on hold.
Default: 600@-19*(.1/.1/1,.1/.1/1,.1/9.5/1)
Played to all parties when a three-way conference call is in progress.
Default: 350@-19;20(.1/.1/1,.1/9.7/1)
Voice tab
177