Linksys SPA9000 Administration Manual page 175

Weekends/Holidays
Weekend/Holiday Answer
Delay
AA LBR Codec
AA Preferred Codec
AA User Pref Codec Only
AA Decode Inband DTMF
Linksys Voice System Administration Guide
When the weekend/holiday Auto-Attendant is enabled, you can use this
setting to specify the weekends and holidays. Up to four weekend days
can be defined. Use this format:
[wk=n1[,ni];][hd=mm/dd/yyyy|mm/dd/yyyy-mm/dd/yyyy[,mm/dd/
yyyy|mm/dd/yyyy-mm/dd/yyyy];]
(wk for weekend, which can be 1 for Monday to 7 for Sunday)
(hd for holiday, which does not have to include the year)
For example, wk=6,7;hd=1/1,2/21/2006,5/30/2006,12/19/2006-12/30/
2006 means that Saturdays and Sundays are the weekends. Holidays are
January 1-2, 2006; May 30, 2006; and December 19-30, 2006.
Number of seconds before the AA answers when operating in the
weekend/holiday mode.
Default: 0
Selects one low bit rate codec as an alternative to G711u and G711a for
playing AA prompts. Choices are {none, G729a, G726-16, G726-24, G726-
32, G726-40}.
Default: None
Selects which codec is the preferred choice to play AA prompts. Choices
are {G711u, G711a, Low Bit Rate}. Low Bit Rate refers to the selected <AA
LBR Codec>. If <AA LBR Codec> is none, G711u is the preferred codec
also.
Default: G711u
Forces the AA to use the preferred codec only.
Default: no
If set to yes the AA tries to decode the incoming audio and check for
DTMF digits if the payload type is G711u or G711a.
Note that the inband DTMF signal coming from the IP network is not as
reliable. This method will consume some resources on the CPU for each
call to the AA. The recommended method is to use out-of-band DTMF
signaling, such as RFC2833 (aka AVT) or SIP INFO.
Default: no
Voice tab
173