Linksys SPA9000 Administration Manual page 38

Set Static Gateway 131
IP Address
Check MAC 140
Address
Check Firmware 150
Version
Check Primary 160
DNS Server
Setting
Set Primary DNS 161
Server
Check 170
administration
web server port
Check LAN IP 210
Address
Check PBX 180
multicast address
Set PBX multicast 181
address
Enable/Disable 7932
administration
web server
Manual Reboot of 732668
Unit
Linksys Voice System Administration Guide
Basic Administration of the SPA9000
Using the Interactive Voice Response Unit
Table 2-1 IVR Options (Continued)
Enter IP address using
numbers on the
telephone key pad. Use
the * (star) key when
entering a decimal
point.
None
None
None
Enter IP address using
numbers on the
telephone key pad. Use
the * (star) key when
entering a decimal
point.
None
None
None
Enter IP address and
port. Use * key for
entering a dot. For
example,
224.168.168.169:8089 is
224*168*168*169*8089.
Enter 1 to enable
Enter 0 to disable
None
DHCP must be "Disable, "
otherwise you hear, "Invalid
Option, " if you try to set this
value.
Requires password
IVR announces the MAC address
of SPA in hex string format.
IVR announces the version of the
firmware running on the SPA.
IVR announces the current
setting in the <Primary DNS>
parameter.
Requires password
IVR announces the port that the
web server is listening on.
(Default is 80)
IVR announces the current IP
address of the LAN port.
IVR announces the current value.
Enter a * between the IP address
and the Port fields. Requires
Password
Requires password
After you hear "Option
Successful, " hang up. Unit
reboots automatically.
36