a. Click the PBX Status link.
b. Find the phone that you want to configure, and then click the hyperlink in the IP Address
column.
c. Click Regional.
d. In the Call Progress Tones section, enter the values from
fields.
e. Click Submit All Changes.
f. Repeat this step as needed for each phone.
Table 8-1 SPA9000 Call Progress Tones by Country
Australia
Dial Tone
Outside Dial Tone
Prompt Tone
Reorder Tone
Off Hook Warning Tone
Ring Back Tone
Busy Tone
Call Waiting Tone
Confirm Tone
Denmark
Dial Tone
Outside Dial Tone
Prompt Tone
Reorder Tone
Off Hook Warning Tone
Ring Back Tone
Busy Tone
Call Waiting Tone
Confirm Tone
Linksys Voice System Administration Guide
Configuring the SPA9000 and SPA9xx Call Progress Tones
400@-19,425@-19;10(*/0/1+2)
420@-16;10(*/0/1)
520@-19,620@-19;10(*/0/1+ 2)
425@-19;*(2.5/.5)
480@-10,620@0;10(.125/.125/1+2)
400@-19,425@-19;*(.4/.2/1+2,.4/2/1+2)
425@-16;10(.375/.375/1)
400@-20;30(0.1/2/1)
600@-16;1(.25/.25/1)
425@-10;*(*/0/1)
425@-16;10(*/0/1)
425@-19,620@-19;*(*/0/1+2)
425@-10;*(0.25/0.25/1)
425@-10;*(.2/.2/1,.2/.6/1)
425@-10;*(1/4/1)
425@-10;10(0.25/0.25/1)
425@-20;30(0.2/0.2/1,0.2/3.6/1,0.2/0.2/1,0.2/0/1)
425@-16;1(.25/.25/1)
Localization
Table 8-1
into the corresponding
121