Client Auto-Configuration - Linksys SPA9000 Administration Manual

platforms are evaluated on a case-by-case basis. Please contact your Linksys sales
representative for further information about obtaining the SPC tool.
The syntax of the plain-text file accepted by the profile compiler is a series of parameter-value
pairs, with the value in double quotes. Each parameter-value pair is followed by a semicolon.
Here is an example of a valid text source profile for input to the SPC tool:
Admin_Passwd "some secret";
Upgrade_Enable "Yes";
Refer to the LVS SPA Provisioning Guide for further details.
The names of parameters in XML profiles can generally be inferred from the SPA9000
configuration Web pages, by substituting underscores (_) for spaces and other control
characters. Further, to distinguish between Lines 1, 2, 3, and 4, corresponding parameter names
are augmented by the strings _1_, _2_, _3_, and _4_. For example, Line 1 Proxy is named
Proxy_1_ in XML profiles.
Parameters in the case of source text files for the SPC tool are similarly named, except that to
differentiate Line 1, 2, 3, and 4, the appended strings ([1], [2], [3], or [4]) are used. For example,
the Line 1 Proxy is named Proxy[1] in source text profiles for input to the SPC.

Client Auto-Configuration

An unprovisioned client station in the factory default state can be automatically provisioned by
the SPA9000 by following the flow chart shown in
When the SPA9000 receives a request for /cfg/init_$MA.xml, it automatically assigns the next
available user ID (extension number) to this client station. The next user ID to be assigned to a
new client station is configured using The <Next Auto User ID> parameter and is automatically
incremented each time a new number is assigned. Before assigning a new user ID, the SPA9000
also checks whether there is any registered client station using that ID and keeps increasing the
ID until an unused value is found.
Linksys Voice System Administration Guide
Remote Provisioning Features
Figure A-5.
146