Linksys SPA9000 Administration Manual page 164

Voice system ip telephony system pstn voip gateway with integrated voice mail server ip phones
Hide thumbs Also See for SPA9000:
Table of Contents

Advertisement

SIP T2
SIP T4
SIP Timer B
SIP Timer F
SIP Timer H
SIP Timer D
SIP Timer J
INVITE Expires
ReINVITE Expires
Reg Min Expires
Reg Max Expires
Reg Retry Intvl
Reg Retry Long Intvl
Reg Retry Random Delay
Linksys Voice System Administration Guide
RFC 3261 T2 value (maximum retransmit interval for non-INVITE
requests and INVITE responses), which can range from 0 to 64 seconds.
Default: 4
RFC 3261 T4 value (maximum duration a message remains in the
network), which can range from 0 to 64 seconds.
Default: 5
RFC 3261 INVITE transaction time-out value, which can range from 0 to
64 seconds.
Default: 32
RFC 3261 Non-INVITE transaction time-out value, which can range from
0 to 64 seconds.
Default: 32
RFC 3261 time-out value for ACK receipt, which can range from 0 to 64
seconds.
Default: 32
RFC 3261 wait time for response retransmits, which can range from 0 to
64 seconds.
Default: 32
RFC 3261 wait time for Non-INVITE response hang-around time, which
can range from 0 to 64 seconds.
Default: 32
INVITE request Expires header value. If you enter 0, the Expires header is
not included in the request. Range: 0–(2
Default: 240
ReINVITE request Expires header value. If you enter 0, the Expires header
is not included in the request. Range: 0–(2
Default: 30
Minimum registration expiration time allowed from the proxy in the
Expires header or as a Contact header parameter. If the proxy returns a
value less than this setting, the minimum value is used.
Default: 1
Maximum registration expiration time allowed from the proxy in the
Min-Expires header. If the value is larger than this setting, the maximum
value is used.
Default: 7200
Interval to wait before the SPA9000 retries registration after failing
during the last registration.
Default: 30
When registration fails with a SIP response code that does not
match<Retry Reg RSC>, the SPA9000 waits for the specified length of
time before retrying. If this interval is 0, the SPA9000 stops trying. This
value should be much larger than the Reg Retry Intvl value, which
should not be 0.
Default: 1200
Random delay range (in seconds) to add to <Register Retry Intvl> when
retrying REGISTER after a failure.
Default: 0 (disabled)
Voice tab
31
–1).
31
–1).
162

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa400Spa9x2

Table of Contents