Display Selection - Omron RX Series User Manual

7 Detailed Functions

Display Selection

• Use this function to set the parameters displayed on the Digital Operator.
• To display all parameters, set this parameter to 00 (Complete display).
Parameter No.
b037
U001 to U012
*1. The default data was changed from the previous model.
Complete Display (b037 = 00)
• Displays all Inverter parameters.
Individual Display of Functions (b037 = 01)
• If a specific function is not selected, its related parameter is not displayed.
• For details on the display conditions, refer to the following table.
No.
1 A001 = 01
2 A001 = 10
3 A002 = 01, 03, 04, 05
4 A017 = 01
5 A041 = 01
6 A044 = 00, 01
7 A044 = 03, 04, 05
8 A044 = 04
9 A044 = 03, 04, 05, and H002 = 00
10 A044 = 03, 04, 05, and H002 = 01, 02
Either A044 or A244, or both of them
11
are 03, 04, 05.
Either A044 or A244, or both of them
12
are 02.
13 A051 = 01, 02
14 A051 = 01, 02
15 A071 = 01, 02
16 A076 = 10
17 A094 = 01, 02
7 - 78
Function name
00: Complete display
01: Individual display of functions
Display Selection 02: User setting + b037
03: Data comparison display
04: Basic display
no: No allocation
User Selection 1 to User
d001 to P196:
Selection 12
Select the parameter number you
want to display.
Display condition
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
Data
Parameters displayed when display condition is met
A005, A006, A011 to A016, A101, A102
A111 to A114, C081 to C083, C121 to C123
A141 to A143
b087
d025 to d027, P100 to P131
P100 to P131 cannot be used.
A046, A047
A041, A042, A043
H002, H005, H050
H060, H061
H020 to H024
H030 to H034
d008 to d010, d012, b040 to b046, H001, H070 to H073
b100 to b113
A052, A056 to A058
A053 to A055, A059
d004, A005, A006, A011 to A016, A072 to A078
A101, A102, A111 to A114, C044, C052, C053, C081 to C083,
C121 to C123
A141 to A143
A095, A096
Default data Unit
*1
–
00
no –