Omron RX Series User Manual page 587

Note 1 Modifying a parameter setting causes the base frequency to be rewritten. This may result in motor burnout depending
on the value. If a warning occurs, be sure to change the parameter setting to a correct value.
2 The parameter settings will be checked even if the Frequency Reference Selection (A001) is set to other than 02
(Digital Operator).
3 A warning will occur if the frequency set in F001, A020, A220, A320, or A021 to A035 falls within the frequency range
set by the Jump Frequency settings.
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
3 Troubleshooting
10 - 13
10