Omron RX Series User Manual page 124

3 Operation and Test Run
Transition of Parameter Display and Key Operation in Function Group U
In the extended function mode U, you can operate the Digital Operator in the same way as in other modes.
However, do not be confused although each parameter number is displayed again for the set value.
Press the Enter key to enter the selected parameter number. Then the display returns to the parameter
display in the extended function mode U.
To display only the user set parameters, set the Display Selection (b037) to 02 (User setting).
Pressing the Enter key does not
return.
3 - 8
Extended Function
Mode U
or
Press the Enter key to enter the
selected parameter number in "U".
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
Extended Function
Mode A
Extended Function
Mode B
Extended Function
Mode C
Extended Function
Mode H
Extended Function
Mode P
(Factory setting)
Monitor
Mode
Function
Mode