Omron RX Series User Manual page 275

Parameter
No.
H003/H203 1st/2nd Motor Capacity
1st/2nd Motor Pole
H004/H204
Number
A003/A203 1st/2nd Base Frequency
A045 Output Voltage Gain
DC Injection Braking
A051
Selection
Motor Rated Voltage
A082
Selection
2
Selection of motor rotation during auto-tuning
In the Auto-tuning Selection (H001), select whether the motor rotates during auto-tuning.
Set value
01
02
Motor rotation
selection
Motor does not
rotate (01)
Motor rotates (02)
Parameter No.
H001
3
Auto-tuning
(1) After presetting of parameters, set the Auto-tuning Selection (H001) to 01 (Enabled:
No motor rotation) or 02 (Enabled: Motor rotation).
(2) Turn ON the RUN command.
Turning ON the RUN command starts automatic operation in the following
procedure.
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
Function name
0.1/0.2/0.4/0.55/0.75/1.1/1.5/2.2/3.0/3.7/
4.0/5.5/7.5/11.0/15.0/18.5/22/30/37/45/
55/75/90/110/132
2/4/6/8/10
30. to 1st/2nd Maximum Frequency
(A004/A204)
20. to 100.
00: Disabled
01: Enabled
02: Enabled (Operates only at set
200-V class: 200 V/215 V/220 V/230 V/
400-V class: 380 V/400 V/415 V/440 V/
Description
The motor does not rotate during auto-tuning.
The motor rotates during auto-tuning.
Measures motor parameter values without rotating the motor. Use this setting if
you do not rotate the motor. Because the motor does not rotate, the Motor
Parameter Io (No-load current) and Motor Parameter J (Moment of inertia)
values cannot be measured.
Measures motor parameter values with the motor rotating. Use this setting if you
can rotate the motor without any problem.
Function name
Auto-tuning Selection
Data
frequency)
240 V
460 V/480 V
Description
Data
00: Disabled
01: Enabled (No motor rotation)
02: Enabled (Motor rotation)
6 Vector Control
Default data Unit
Maximum
applicable kW
motor capacity
4 pole
60 Hz
100. %
00 –
200
V
400
Default data Unit
00 –
6 - 7
6