Omron RX Series User Manual page 128

3 Operation and Test Run
(4) Change the 2nd digit of the extended function parameter number.
(5) Change the 1st digit of the extended function parameter number.
3 - 12
• In the 2nd digit, "0" is blinking.
• Press twice.
("A021" is displayed.)
• In the 2nd digit, "2" is blinking.
• Press to enter the value blinking in the digit.
("2" is entered.)
Note If you press
the blink returns to the digit in which you entered
the previous value.
• In the 1st digit, "1" is blinking.
• Press 8 times, or press
("A029" is displayed.)
• In the 1st digit, "9" is blinking.
• Press to enter the value blinking in the digit.
("9" is entered.)
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
when the digit is blinking,
twice.