CX-Drive Connection Procedure
There are two methods to connect the CX-Drive with the inverter.
The step-by-step procedure for each method is provided below.
Connecting by registering inverter connection method beforehand
Create a new inverter project, set the connecting method, and connect with the inverter.
Follow the steps below.
1
Start the CX-Drive and, from the [File] menu, select [New].
2
In the [New Drive] window, set the drive type of the target inverter.
Under [Drive Type], select the inverter series name and click the [Settings] button to the right.
In the [Drive Type Settings] window, set the Installation Type/Option, Voltage Class, and
Maximum Motor Capacity and select [V1] in Specifications.
After setting these items, click the [OK] button to close the [Drive Type Settings] window.
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
3 Operation and Test Run
3
3 - 17