Overview Of Lcd Digital Operator - Omron RX Series User Manual

3-2

Overview of LCD Digital Operator

The LCD Digital Operator (Model: 3G3AX-OP05) is an optional Digital Operator with a 5-line LCD
screen.
This LCD Digital Operator is newly supported in the 3G3RX-V1 Series and cannot be used with the
previous model.
• The LCD Digital Operator can display up to four monitor functions or parameter settings in the
selected language (currently English only).
• Similar to the standard LED Digital Operator, the LCD Digital Operator supports the starting/stopping
of the inverter, parameter setting, monitor checking, trip error/warning data checking, and other
operations.
• The LCD Digital Operator can store up to four sets of inverter parameter setting data, or a single set
of inverter parameter setting data and a single DriveProgramming program in its internal memory.
• The LCD Digital Operator supports all read/write of inverter parameters and DriveProgramming
program data. However, it can write parameter data to only the same model and the same version of
inverters.
• The LCD Digital Operator has a capability to verify the parameter data stored in it and that stored
inside the inverter.
• The LCD Digital Operator can be mounted directly on the inverter. The use of the Digital Operator
Cable not only extends its application to handy operation but also enables panel-mounting.
Install or remove the Digital Operator with the power supply shut off. Not doing so may result in failure.
For details on the functions of the LCD Digital Operator, refer to "LCD Digital Operator 3G3AX-OP05
User's Manual (I579)".
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
3 Operation and Test Run
3
3 - 15