Omron RX Series User Manual page 246

5 Basic Settings
Additional Information
• If the reset signal is input during the restart standby time, the frequency at shutoff value stored
in the inverter will be cleared, resulting in a 0-Hz start.
• The details of the Starting Frequency Selection at Frequency Pull-in Restart (b030) are shown
below.
Set value
00
01
02
5 - 50
Description
Frequency at Executes pull-in restart at frequency at which inverter
shutoff output is shut off.
Maximum
Executes pull-in restart at maximum frequency.
frequency
Executes pull-in restart at reference frequency at which
Set frequency
inverter operates normally.
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
Explanation