Other Pump Control Algorithms; Set Relays To Alternate Duty Backup [6 Relay Model]; Set Relays To Fixed Duty Assist - Siemens HydroRanger 200 Instruction Manual

Other Pump Control Algorithms

Set Relays to ALTERNATE DUTY BACKUP [6 relay model]

Parameter
P111
P111
P111
Set the Relay ON Setpoints [6 relay model]
Parameter
P112
P112
P112
Set the Relay OFF Setpoints [6 relay model]
Parameter
P113

Set Relays to FIXED DUTY ASSIST

Parameter
P111
P111
P111
Set the Relay ON Setpoints
Parameter
P112
P112
P112
Set the Relay OFF Setpoints
Parameter
P113
7ML19985FC03
Index Value Description
1 53
2 53
3 53
Index Value Description
1 0.4m
2 0.3m
3 0.2m
Index Value Description
0 1.3m
Index Value Description
1 50
2 50
3 50
Index Value Description
1 0.4m
2 0.3m
3 0.2m
Index Value Description
0 1.3m
HydroRanger 200 – INSTRUCTION MANUAL
Sets the pump relays (index 1, 2, and 3) to
ALTERNATE DUTY BACKUP .
Sets the three setpoints for the pump relays.
The first cycle will use these setpoints.
Subsequent cycles rotate the setpoints
among the pumps.
By using index 0 all six relays are set at the
same time, including any alarm relays. Use
with caution.
Sets the pump relays (index 1, 2, and 3) to
FIXED DUTY ASSIST. Multiple pumps can run
simultaneously.
Sets the three setpoints for the pump relays.
The setpoints remain attached to the pump
relays.
By using index 0 all six relays are set at the
same time, including any alarm relays. Use
with caution.
Page 59