Siemens HydroRanger 200 Instruction Manual page 262

Soft-
ware Date
Rev.
1.04 Feb. 11, 2003
1.05 Feb. 21, 2003
1.06 May 27, 2004
1.07 Aug. 30, 2004
Page 252
• Product enhancements to eliminate relay
chatter on software download.
• Improved functionality of receiver saturation
during calibration.
• Added relay functionality thru P118 to
coincide with manual.
• Improved product security with addition of
P069.
• Backup level override behaviour
improvement.
• Improved mA control with P210 - P213.
• Improved temperature calibration in factory
mode.
• Improved Production Testing support.
• Improved reset behaviour.
• Changed default mA trim values.
• Improved functionality of downloading
downloading in Dolphin +.
• RCVR offset limits are no longer handled in
the code.
• OCM Time Units improvement.
• Totalizer enhancement to prevent a rounding
error puting the totalizer into an unstable
"mode."
• Totalizer - Access to totalizer in OCM mode
from Modbus map (reg 41040).
• P060, P005 Dependancy removed.
• Split Values - Parameters with the "xx:yy"
format now being limited properly.
• Temperature Spike - Temperature readings
now being protected from other units'
transmit pulse.
• TVT Shift - A rounding error in the number of
samples caused the TVT to shift position.
• Auto False Echo Suppression - Device learns
the shape of an empty tank to automatically
suppress false echos.
• SIMATIC PDM Compatability - Device uses
Modbus to communicate with PDM. DDs
required.
HydroRanger 200 – INSTRUCTION MANUAL
Changes
7ML19985FC03