Siemens HydroRanger 200 Instruction Manual page 162

P251 0 or 4 mA Input Level [6 relay model]
Shows the process level corresponding to the 0 or 4 mA value.
Primary Index
Values
Related
When using an external mA signal to determine level, the input range must be scaled to
give accurate results.
P252 20 mA Input Level [6 relay model]
Shows the process level corresponding to the 20 mA value.
Primary Index
Values
Related
Input range is scaled for accuracy if an external mA signal calculates level.
P253 Input Filter Time Constant [6 relay model]
Shows the time constant used in the mA input filter to dampen signal fluctuations.
Primary Index
Values
This number in seconds is used in the damping calculations. Larger values damp more
than smaller values and 0 disables the signal filter.
P254 Scaled mA Input Value [6 relay model]
Shows the resulting level value after scaling.
Primary Index
Values
This parameter is calculated from the input mA signal.
Page 152
Global
Range: -999 to 9999%
Preset: 0%
• P006 Empty
• P007 Span
Global
Range: -999 to 9999%
Preset: 100%
• P006 Empty
• P007 Span
Global
Range: 0 to 9999
Preset: 1
Global
Range: -999 to 9999% (view only)
Preset: calculated from the input mA signal
HydroRanger 200 – INSTRUCTION MANUAL 7ML19985FC03