Mounting Instructions; Wall Mount - Siemens HydroRanger 200 Instruction Manual

Mounting Instructions

The wall mount and panel mount units install differently. Please follow the specific
instructions for your unit.
When routing cable through a conduit, please follow the Cable Routing
Note:
instructions on page 10 before mounting the HydroRanger 200.

Wall Mount

Enclosure Dimensions
14.9 mm
(0.58")
15.2 mm
(0.6")
Mounting the Enclosure
1. Remove the lid screws and open the lid to reveal the mounting screw holes.
2. Mark and drill four holes in the mounting
surface for the four screws (customer supplied).
3. Fasten with a long screwdriver.
Please note:
• Recommended mounting: directly to wall or to
electrical cabinet back panel
• Recommended mounting screws: #6
• If alternate mounting surface is used, it MUST
be able to support four times the weight of the
unit.
7ML19985FC03
160.3 mm
(6.325")
130 mm
(5.125")
HydroRanger 200 – INSTRUCTION MANUAL
91 mm
(3.58")
4.3 mm dia.
(0.17")
four mounting
holes
lid screws
(6)
mounting screw holes
6.6 mm
(0.26")
240 mm
(9.45")
227 mm
(8.93")
Page 9