The Hydroranger 200; Hydroranger 200 [1 Or 3 Relay Model]; Hydroranger 200 [6 Relay Model]; The Manual - Siemens HydroRanger 200 Instruction Manual

The HydroRanger 200

The HydroRanger 200 is available in two models, a 1 or 3 relay model, and a 6 relay model,
and is designed for a variety of applications:
• water and wastewater
• storage tanks, for measuring liquids, slurries, and solids
• hoppers, ore bunkers, flotation cells

HydroRanger 200 [1 or 3 relay model]

This model of the HydroRanger 200 is a single point level, one or three relay measurement
device. It is equipped with digital communications and offers the latest in echo
processing technology and diagnostic features.

HydroRanger 200 [6 relay model]

This model of the HydroRanger 200 is a single or dual-point, six relay device that offers
both level and volume measurement. It has Open Channel Monitoring capabilities, a
larger number of advanced pump control algorithms, and is equipped with digital
communications. It offers the latest in echo processing technology and diagnostic
features.

The Manual

Notes:
• This product is intended for use in industrial areas. Operation of this equipment
in a residential area may cause interference to several frequency based
communications.
• Please follow the installation and operating procedures for a quick, trouble-free
installation and to ensure the maximum accuracy and reliability of your
HydroRanger 200.
The manual provides instruction for both models of the HydroRanger 200. For your
convenience, the manual uses HydroRanger 200 (1 or 3 relay model) features as its
standard content. Additional HydroRanger 200 features are clearly marked.
The manual is designed to help you get the most out of your HydroRanger, and it provides
information on the following:
• How to program the unit
• Example applications
• Principles of operation
• Parameter values
• Parameter uses
1.
Modbus is a registered trademark of Schneider Electric.
7ML19985FC03 HydroRanger 200 – INSTRUCTION MANUAL
• Outline diagrams
• Wiring diagrams
• Installation requirements
1
• Modbus® register mapping
• Modem configuration
Page 1