Loss Of Echo (Loe) - Siemens HydroRanger 200 Instruction Manual

With P112 and P113, you can set a high alarm (P112 > P113) or a low alarm (P112 < P113).
This shows a high alarm:
Parameter
P111
P112
P113
P110
The temperature source can be the temperature sensor built into the transducer or an
external TS-3, as set by P660.

Loss of Echo (LOE)

Parameter
P110
P111
P070
7ML19985FC03
Index Value
5 5
5 45
5 43
5 1
Index Value
5 1
5 6
G 0.5
HydroRanger 200 – INSTRUCTION MANUAL
Description
Alarm on temperature
ON setpoint at 45 °C
OFF setpoint at 43 °C
Take the temperature reading from
Transducer One
Description
Alarm on LOE for Transducer One
Alarm on LOE
Trip alarm when 0.5 minutes (30 seconds)
pass without detecting a valid echo.
Page 55