Siemens HydroRanger 200 Instruction Manual page 132

Use these parameters to enable the HydroRanger 200 to show readings based on vessel
or wet well volume (rather than level).
P050 Tank Shape [6 relay model]
Enter the Tank Shape value matching the monitored vessel or wet well.
When Operation is LEVEL (P001 = 1), liquid (material) volume is calculated.
Alternatively, when Operation is SPACE (P001 = 2), remaining vessel capacity is
calculated. In RUN mode, readings are displayed in percent of maximum volume. To
convert readings to volumetric units, see
Primary Index
Page 122
Level
HydroRanger 200 – INSTRUCTION MANUAL
Maximum Volume (P051)
.
7ML19985FC03