Multiple Readings [6 Relay Model] - Siemens HydroRanger 200 Instruction Manual

Setting the Default Auxiliary Reading
To maintain a constant variable display in the auxiliary reading area, set the default.
Example:
To leave the level reading on the screen and view the echo confidence in the auxiliary
reading field, set the following parameter:
Parameter
P730
Setting a Specific Auxiliary Reading
To display a second auxiliary reading, press
Example: To set
Parameter
P731

Multiple Readings [6 relay model]

During differential or average operation (P001 = 4 /5), the display scrolls sequentially
through Point Numbers 1, 2, and 3. Point 3 is the difference between (or average of) Points
1 and 2.
Changing Number Scrolling Speed
Parameter
P732
Parameter Indexing
See
to the hand programmer and assume that the HydroRanger 200 is activated.
7ML19985FC03
Index Value
G 805
to display current temperature, go to P731:
P
Index Value
G 912
Index Value
G 5
on page 35. All the instructions in the following procedures apply
HydroRanger 200 – INSTRUCTION MANUAL
Description
Auxiliary field defaults to P805
in RUN mode.
P
Description
Shows P912–Transducer Temperature
Description
Hold each value for 5 seconds
Page 25