Siemens HydroRanger 200 Instruction Manual page 180

P606 Time Units [6 relay model]
Determines the units used to display current flow and logging flow values.
Primary Index
Values
Alters
Altered By
This is used when the Primary Measuring Device is Ratiometric (P608=0).
Example
Conditions
• Flowrate display: millions of gallons/day,
• Maximum flowrate is 376,500,000 gallons/day
P607 Flowrate Decimal [6 relay model]
The maximum number of decimal places to be displayed.
Primary Index
Values
Altered By
In RUN mode, the number of decimal places displayed is automatically adjusted (if
necessary) to prevent the number of Flowrate digits from exceeding display capabilities.
The maximum number of head decimal places is controlled by Decimal Position (P060).
Page 170
Single Point Model
Global
1 seconds
2 minutes
3 hours
4 * days
•
• P608 Flowrate Units
Single Point Model
Global
0 no digits after the decimal point
1 1 digit after the decimal point
2 2 digits after the decimal point
3 3 digits after the decimal point
• P060 Decimal Position
HydroRanger 200 – INSTRUCTION MANUAL
Dual Point Model
Transducer
Enter
• 376.5 for Maximum Flow (P604)
• and 4 for Time Units (P606).
Dual Point Model
Transducer
7ML19985FC03