Siemens HydroRanger 200 Instruction Manual page 130

Related
(chart cont' d from
previous page)
P005 Units
Specifies measurement units used for dimensional values.
Primary Index
Values
Alters
Changing this value automatically changes the units displayed for many parameters.
Existing values are converted and do not have to be re-entered.
P006 Empty
Enter distance in units (P005) from the face of the transducer to the process empty point.
Primary Index
Values
Alters
Altered By
Related
Setting this value also sets Span (P007) unless Span was already set to another value.
For distance operation (P001=3), Span is preset to Empty.
Page 120
• P203 mA Output Value/Transducer
• mA Input (P250 to P260) (related only to Value 250)
• P800 Near Blanking
• P823 Reform Echo
• P832 TVT Shaper Adjust
• P840 Short Shot Number
• P841 Long Shot Number
• P842 Short Shot Frequency
• P843 Long Shot Frequency
• P844 Short Shot Width
• P845 Long Shot Width
• P852 Short Shot Range
Global
1 * Meters
2 Centimeters
3 Millimeters
4 Feet
5 Inches
• P006 Empty
• P007 Span
• P603 Maximum Head
• P605 Zero Head
• P620 Low Flow Cutoff
• P921 Material Measurement
• P926 Head Measurement
• P927 Distance Measurement
Transducer
Range: 0.000 to 99.000 m (or equivalent depending on units)
Preset: 5.000 m (or equivalent depending on units)
• P007 Span
• P005 Units
• P800 Near Blanking
• P921 material Measurement
• P927 Distance Measurement
HydroRanger 200 – INSTRUCTION MANUAL 7ML19985FC03