Indication Of Terminated Calls - Aastra 6757i CT User Manual

Notes:
When both call diversion and call destination are enabled, the information displays to the phone's screens in the fol-
lowing order:
Screen 1 Caller info
Screen 2 Call destination
Screen 3 Call diversion
If your phone does not display call destination information, your System Administrator may have disabled this feature.
Contact your System Administrator for more information.

Indication of Terminated Calls

An Administrator can configure your phone to display a disconnected screen ("Call Terminated") when the far-end hangs
up. An audible busy signal is also heard on the phone. The configuration of this feature can also include the maximum
time interval that the busy signal is audible. Contact your System Administrator for more information.
The following is the call terminated screen that displays on the 6757i if this feature is enabled on your phone:
The following table identifies when a call terminated screen displays on the phone for different scenarios.
IF
1 line active and far-end disconnects,
2 or more lines active, and far-end disconnects,
2 or more lines active, and a line NOT in focus is disconnected
by the far-end,
An incoming call comes in on the line in focus that has a discon-
nected screen displaying,
41-001384-00 Rev 01 – 06.2013
Available Features Enabled by Administrators
6757i
L1
Call Terminated
THEN
the line in focus:
displays disconnected screen.
plays busy tone.
displays "Call Terminated" message on the screen.
the line not in focus:
plays busy tone.
the line in focus:
displays disconnected screen.
plays busy tone.
displays "Call Terminated" message on the screen for 5 seconds.
When 5 second times out:
the busy tone stops
the disconnected screen disappears.
no busy tone plays
no disconnected screen displays
no "Call Terminated" message displays
the line in focus with no calls on hold:
displays a ringing screen
the line in focus WITH calls on hold:
flashes its' Line LED
219