Indication Of Terminated Calls - Aastra 6755i User Manual

Indication of Terminated Calls

An Administrator can configure your phone to display a disconnected screen ("Call
Terminated") when the far-end hangs up. An audible busy signal is also heard on the phone. The
configuration of this feature can also include the maximum time interval that the busy signal is
audible. Contact your System Administrator for more information.
The following is the call terminated screen that displays on the 6755i if this feature is enabled on
your phone:
IF
1 line active and far-end disconnects,
2 or more lines active, and far-end disconnects,
2 or more lines active, and a line NOT in focus is
disconnected by the far-end,
An incoming call comes in on the line in focus that
has a disconnected screen displaying,
248
6755i
L1
Call Terminated
THEN
the line in focus:
• displays disconnected screen.
• plays busy tone.
• displays "Call Terminated" message on the screen.
the line not in focus:
• plays busy tone.
the line in focus:
• displays disconnected screen.
• plays busy tone.
• displays "Call Terminated" message on the screen for 5 seconds.
When 5 second times out:
• the busy tone stops
• the disconnected screen disappears.
• no busy tone plays
• no disconnected screen displays
• no "Call Terminated" message displays
the line in focus with no calls on hold:
• displays a ringing screen
the line in focus WITH calls on hold:
• flashes its' Line LED
Model 6755i IP Phone User Guide