Indication Of Terminated Calls - Aastra 6755i User Manual

Release 3.2.2 service pack 3 hot fix 1
Hide thumbs Also See for 6755i:
Table of Contents

Advertisement

Notes:
When both call diversion and call destination are enabled, the information displays to the phone's screens in the fol-
lowing order:
Screen 1 Caller info
Screen 2 Call destination
Screen 3 Call diversion
If your phone does not display call destination information, your System Administrator may have disabled this feature.
Contact your System Administrator for more information.

Indication of Terminated Calls

An Administrator can configure your phone to display a disconnected screen ("Call Terminated") when the far-end hangs
up. An audible busy signal is also heard on the phone. The configuration of this feature can also include the maximum
time interval that the busy signal is audible. Contact your System Administrator for more information.
The following is the call terminated screen that displays on the 6755i if this feature is enabled on your phone:
IF
1 line active and far-end disconnects,
2 or more lines active, and far-end disconnects,
2 or more lines active, and a line NOT in focus is disconnected
by the far-end,
41-001386-00 REV01 – 06.2013
Available Features Enabled by Administrators
6755i
L1
Call Terminated
THEN
the line in focus:
displays disconnected screen.
plays busy tone.
displays "Call Terminated" message on the screen.
the line not in focus:
plays busy tone.
the line in focus:
displays disconnected screen.
plays busy tone.
displays "Call Terminated" message on the screen for 5 seconds.
When 5 second times out:
the busy tone stops
the disconnected screen disappears.
no busy tone plays
no disconnected screen displays
no "Call Terminated" message displays
194

Advertisement

Table of Contents
loading

Table of Contents