Installing The New Intrusion Switch Cable - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

16.3.3 Installing the new intrusion switch cable

Figure 214: Attaching a rubber bumper to the front intrusion switch
I
In case of rack server configurations, a rubber bumper needs to be
attached to the front intrusion switch as described below. When working
on a tower server, please skip this step.
Ê Attach a rubber bumper (C26192-Y26-C43) to the front intrusion switch as
shown.
TX140 S2
Upgrade and Maintenance Manual
Cabling
311