Installing A Riser Module - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Basic hardware procedures
4.10.2

Installing a riser module

Installing the riser module 1
Figure 22: Installing the riser module 1
▶ Insert the riser module.
▶ Fasten the riser module with the knurled screw (see circle).
▶ If applicable, connect internal cables to the expansion card or GPU.
For the cable plan, see "Appendix B" on page 571.
▶ If applicable, connect an FBU cable to the expansion card, see
"Installing
an FBU" on page 317.
72 Upgrade and Maintenance Manual RX2540 M6