Preliminary Steps; Removing The Defective 2.5-Inch Hdd/Ssd Module; Installing The New 2.5-Inch Hdd/Ssd Module; Concluding Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
7.2.7.1

Preliminary steps

"Locating the defective server" on page 50
Ê
"Locating the defective component" on page 51
Ê
7.2.7.2

Removing the defective 2.5-inch HDD/SSD module

Ê Remove the HDD/SSD module as described in section
HDD/SSD modules" on page
Ê If applicable, remove the HDD/SSD from the installation frame as described
in section "Handling HDDs or SSDs without installation frame" on page
7.2.7.3

Installing the new 2.5-inch HDD/SSD module

Ê If applicable, install the HDD/SSD in the installation frame as described in
section "Handling HDDs or SSDs without installation frame" on page
Ê Install the HDD/SSD module as described in section
HDD/SSD modules" on page
7.2.7.4

Concluding steps

"Performing a RAID array rebuild" on page 96
Ê
150
147.
144.
Upgrade and Maintenance Manual
"Removing 2.5-inch
135.
"Installing 2.5-inch
RX1330 M3
135.